M25 Female Socket Quick Lock Connector 2+1+5 For Shared Electric Bikes Charging / Discharging

The M25 Charging Pile Board-End Waterproof Plug is a circular, mid-large power interface engineered specifically for board-side termination inside AC/DC charging piles, charging cabinets, and battery swap stations. Built on the M25×1.5 coupling body, it carries the main DC charge bus or AC auxiliary feed from the pile enclosure wall directly onto the control board or power module, while maintaining IP67 sealed protection against rain spray, condensation, and washdown.

Unlike generic M25 cable joiners, this board-end version is supplied as a panel-mount receptacle with pin-header/solder-tab/screw-terminal tail that bolts to the charging pile sheet-metal or DIN bracket, plus a matching field-wireable or molded male plug for cable-side connection. Common pin configurations include 2-pin (DC+/-), 2+3, 2+5, and 2+1+5 for e-bike, scooter, and L2 charger applications.

• 30-50 A DC capacity on charger board with single sealed panel pass-through
• Clean internal layout with board-end mounting for fixed, repeatable power landing
• IP67 mated (IP68 optional) protection against immersion, hose-down, and condensation
• Quick-lock or threaded options for flexible service models
• EV-grade contacts with brass/copper-alloy pins and silver/gold flash plating
• Anti-miswire keying prevents reversed DC+/- and incorrect signal mapping
• Field repairable design for easy maintenance without tearing pile harness

• Mount: Panel-mount board-end receptacle with hex nut + O-ring + mating field/molded plug
• Coupling: M25×1.5 thread or push-lock quick release
• Pin maps: 2 / 2+3 / 2+5 / 2+1+3 / 2+1+5 (power + signal/comms)
• Tail styles: PCB straight pin header, 90° pin header, M4 screw, faston 6.3, solder cup
• Gland: Rear strain relief for Φ6-16 mm cable (insert swap)
• Shell: PA66+GF (black/blue), nickel-brass/zinc option for high EMC piles
• Seal: Silicone O-rings, EPDM rear grommet, optional mating cap
• Protections: Dust/UV/salt-spray 48h/oil-corrosion/anti-vibration per IEC 60512

• AC/DC charging piles: L2 EV chargers, 7 kW-21 kW residential piles, 30-120 kW commercial DC piles
• Battery swap cabinets & power exchange stations: 48 V/72 V/100 V DC bus to BMS board
• Shared micromobility docks: electric bike/motorcycle charging rack board-end sockets
• Energy storage & PV: inverter-to-EMS board feed, combiner box panel pass-through
• Industrial charger cabinets: AGV battery chargers, forklift opportunity-charge piles