Straight Through 3 Way 4 Way Circular Waterproof Connector 2/3/4/5/6 Core Outdoor Cable Terminal Connector

The Triple-Port Circular Sealed Connector (also known as a 3-way T-shaped or Y-shaped round splitter, or a 3-port enclosed junction connector) is a compact, ingress-protected circular interconnection device that enables a single incoming cable to divide securely into two outgoing devices while preserving a dust-tight and watertight seal at the entire junction.

Unlike exposed screw-terminal splice boxes, its rounded molded or threaded-lock housing fitted with O-rings or gasket seals delivers a clean, code-compliant division point for exterior LED illumination, photovoltaic arrays, detectors, small motors, and field power taps without needing to route everything back to a control panel.

• Single-action branching, no enclosure required: Convert one cable run into two powered devices on location—ideal when installing a second streetlamp, camera, or detector midway along a line
• Authentic IP67/IP68 sealing (when mated): Dual O-ring plus threaded nut or molded grommet barrier blocks rain, washdown, condensation, and brief submersion
• Field-terminable or pre-molded choices: Screw-terminal and gland versions accept various cable sizes, allowing custom lengths and assembly with basic tools
• Error-prevention keying: Keyed round inserts avoid reverse polarity on LED and 24V DC loads
• Industrial-quality contacts: Gold-flashed brass or phosphor bronze with contact resistance ≤ 5 mΩ
• Broad temperature range: -40°C to +85°C standard (some variants support +105/+120°C)
• Low inventory expense: One 3-way unit replaces multiple components

• Round threaded coupling nut (M12×1, M16, M20) or push-lock bayonet with knurled surface
• T-shaped (inline tap) and Y-shaped (symmetrical branch) housing geometries available
• Integrated strain relief on every port (pull-out force ≥ 50N)
• PA66+GF / PBT shell, UV-resistant, UL94-V0 flammability class
• Nickel-plated brass or stainless steel option for marine environments
• Silicone / EPDM O-rings, epoxy-filled cavities on molded types
• Polarity-labeled terminals (L/N/G or 1/2/3) on screw-terminal models

• Outdoor LED illumination: streetlights, garden/facade/landscape lights, tunnel and bridge luminaires, LED strips in signage
• Solar and battery systems: photovoltaic string tapping, combiner box auxiliary feed, off-grid cabin branches
• Surveillance and smart city infrastructure: splitting a single PoE or DC cable to two cameras or sensor nodes
• Industrial automation: M12 3-way taps for proximity sensors, I/O devices, and control systems