M12 IP67 Waterproof Cable Connector 4 Pin Plastic Male Female Straight And Right Angle Screw Termina

The M12 Solderless Plug (also called M12 push-in / spring-cage / IDC field-wireable plug) is the no-iron, no-crimp-gun version of the classic M12×1.0 circular connector. It conforms to IEC 61076-2-101 (A-code sensor/actuator) and IEC 61076-2-109 (D/X-code Ethernet), mates with any standard M12 panel socket or M12 cordset, and delivers IP67 sealing when locked with the correct O-ring and cable gland.

Instead of soldering wire to a cup, you strip 6-8 mm of jacket, insert the conductor into a color/number-coded chamber, and a spring clip or IDC blade grips it automatically—assembly time drops from ~10 minutes (screw) to under 60 seconds per contact with no cold-joint risk.

It is the default fast-termination choice for 24 VDC sensor clusters, IO-Link devices, PROFINET drops, and field maintenance where a soldering iron is impractical on a live cabinet door.

• Zero soldering, 60-second termination: Push-in spring or IDC blade grips 0.14-0.75 mm² (26-20 AWG) solid/stranded wire—no iron, no flux, no heat damage to PUR/PVC jacket
• IP67 sealed, M12×1.0 threaded lock: O-ring face + rear gland blocks dust, oil mist, and hose-down; knurled nut finger-tight + 0.4 N*m driver, anti-vibration on conveyors and AGV mounts
• 4 A / 250 V on 3-4 pin A-code, 4 A / 60 V on 5-pin, 2 A on 8-pin: Covers every 24 VDC proximity/photoelectric sensor, 3-wire switch, valve coil, and 100 Mbps PROFINET node
• Gold-plated brass/bronze contacts, ≤5 mΩ: Spring pressure is constant (no screw-loosening under vibration), 100-500+ mating cycles, -40 °C to +85 °C operation
• Coding prevents mis-mate: A / B / D / X keyways are mechanically exclusive—no reversed L/N or swapped TX/RX on site
• Straight or 90° right-angle, plastic or shielded metal shell options available
• Lower lifecycle cost than screw plugs: 50% faster than screw termination, no re-torque inspection, reusable contact carrier
• Lower SKU count than molded cordsets: Stock 3/4/5/8-pin A/D/X solderless plugs + a reel of cable = any length on demand

• Factory automation: proximity/photoelectric sensors, valve islands, IO-Link masters, conveyor encoder taps
• Industrial Ethernet: D-code 4-pin 100 Mbps PROFINET/EtherNet/IP, X-code 8-pin Gigabit camera drops
• Field maintenance & retrofit: cut-and-reterminate damaged sensor leads, 5-min pole-top repair on streetlight controllers
• Robotics & AGV: wrist-tool sensors, cobot end-effector signal, mobile robot skin ports
• Outdoor & transport: solar combiner aux, railway wayside telemetry, marine NMEA 2000 micro drops
• Machine building: prototype machines, lab automation, custom enclosures where cordset lengths don't fit